Asbestos removal is a very sensitive undertaking, which requires high precautionary standards. The preparation phase is particularly important in avoiding adverse health effects on workers and house occupants.
Listed here is a simple guideline which a qualified specialist would follow in preparation for removal of friable products (asbestos containing material in powder form), depending on information through the Australian Department of your practice, Employment and Workplace Relations:
1. Preparation For Removal Project
Before you decide to attempt to do anything whatsoever, you have to follow these preparatory procedures:
- You must first obtain an asbestos removal control plan (ARCP), along with the work instructions.
- To guarantee the highest standards of safety and compliance of the project, an on-site assessment must be performed. Relevant data can even be sourced from a current asbestos register.
- It's necessary that calculations are made of the specified quantity of materials, in line with the quality requirements, specifications and plans.
- Applicable environmental requirements should be identified in order that the project can conform to all regulatory obligations.
- The fitness of workers involved in the project should be preserved. Therefore, you ought to apply all processes needed in meeting health surveillance requirements. This too involves air monitoring.
- Authorization will then be obtained (according to company and legislative requirements) after finishing the preparation phase.
- All workers mixed up in project needs to be supplied with personal protective gear (PPE) that is in conjuction with the job. Such equipment ought to be checked for faults beforehand.
2. Preparation Of Removal Area And
When the project continues to be authorized, following the initial preparation phase, an extra preparation of the actual website is necessary. This calls for the following activities:
� The particular materials containing asbestos needs to be identified along with the asbestos register checked.
� Having identified the mark materials, you may then implement signage and barricade procedures. That is necessary in delineating work areas inside site; hence preventing unwarranted access by unqualified persons.
� Obviously, it's also advisable to setup the decontamination unit before starting the job.
� You additionally should test the decontamination procedures, in order to be sure of their effectiveness, while ruling out chances of error.
� Similarly, all equipment and materials which will be employed in elimination of asbestos containing material (ACM) ought to be checked ahead of the operation.
� It's crucial that adjacent utilities are assessed beforehand. Such utilities as power lines and water pipes might need deactivation, containment or diversion. It will avert avoidable risks.
� The code of practice and applicable legislation would also need notify all occupants from the building, neighbors and any other individual who could possibly be suffering from the operation.
3. Enclosing The Removal Site
This is the last step associated with preparation for the removal project. Various activities involved include:
- You need to get the best fitting enclosure type and removal process, depending on how extensive the removal project is.
- Since friable goods are potentially more harmful than non-friable products (ACM in solid form), stricter enclosure procedures will be required.
- Once a particular enclosure type is selected, you must be sure that negative air pressure is maintained inside, in compliance with legislative requirements. It ought to also be inspected and smoke tested to ensure that it is absolutely air-tight.
- After completing these preparatory procedure, a licensed assessor ought to be notified of the proposed asbestos removal project.